ELECTRIC FENCES

Equipment – Installation – Support – Maintenance – Response – Transmission

Together with our professional local partners the Technology Team of Mint Master Security Tanzania has selected all fencing materials and equipment with care to ensure a high quality, long lasting, effective and aesthetically pleasing Electric Fence for your needs.

We ensure the best materials considering the corrosive environment on the coast lines of Tanzania, Kenya, Mozambique and South Africa.

The fencing posts are 20mm x 20mm x 1000 mm long hollow section square (HS) tube, cut to length, drilled and galvanized to ensure maximum protection against corrosion. The tops of the poles are capped to avoid ingress of water. Insulators are made of heavy-duty resistant material. The posts will be spaced, approximately three metres apart (where practical). Strainers will be installed approximately every corner of the premises and sufficient earthing conductors installed.

We have chosen to use galvanized wire because of its high resistance to corrosion and low electrical resistance, thus ensuring maximum voltage is achieved, even at the furthest point. A Merlin - Harmer Energiser with battery back-up, siren output, low voltage, will power the system. The system will be connected to the Siren and a Strobe light.

Additionally any Electric Fence, even your existing one, can be connected to Mint Master Group Interactive GSM based products. This enables you, anywhere in the world, to control the status of your Electric Fences. Within seconds you can check if the system is armed or disarmed. Moreover via SMS you can also manage to arm and disarm your fences as you desire.