Electric Fencing
Mint Master Technologies has selected
all fencing materials and equipment with care to ensure a high
quality, long lasting, effective and aesthetically pleasing Electric
Fence for your needs.
We ensure the best materials considering the corrosive environment
on the coast lines of Tanzania, Kenya, Mozambique and South Africa.
The fencing posts are 20mm x 20mm x 1000 mm long hollow section
square (HS) tube, cut to length, drilled and galvanized to ensure
maximum protection against corrosion. The tops of the poles are
capped to avoid ingress of water. Insulators are made of heavy-duty
resistant material. The posts will be spaced, approximately three
metres apart (where practical). Strainers will be installed on
approximately every corner of the premises and sufficient earthing
conductors installed.
We have chosen to use 3 different types of wire according to each
site location due to their high resistance to corrosion and low
electrical resistance, thus ensuring maximum voltage is achieved,
even at the furthest point. A Merlin - Hammer Energiser with battery
back-up, siren output, low voltage, will power the system. The
system will be connected to the Siren and a Strobe light.
Additionally any Electric Fence, even your existing one, can be
connected to Mint Master Technolgies Interactive GSM based products.
This enables you, anywhere in the world, to control the status
of your Electric Fences. Within seconds you can check if the system
is armed or disarmed. Moreover via SMS you can also manage to
arm and disarm your fences as you desire.
